l   饻y
 
2 Coat System PVDF Coating Work Flow < BACK


1. 12 Stages Chemical Pretreatment
  Step 1 - Alkaline degreasing
Step 2 - Tap water rinsing
Step 3 - Tap water rinsing
Step 4 - Etching & Desmutting
Step 5 - Tap water rinsing
Step 6 - Tap water rinsing
Step 7 - Chromate conversion coating
Step 8 - Deionized water rinsing
Step 9 - Deionized water rinsing
Step 10 - Deionized water rinsing
Step 11 - Drying
Step 12 - Quality inspection for chemical pretreatment
2. Dusts on coating surface are removed by air ionizing blowers.
3. Electrostatic spray applied flash primer with dry film thickness 5-8 microns.
4. Electrostatic spray applied PVDF top coat with dry film thickness 25-30 microns.
5. Coated parts are thermal cured with metal surface temperature 230 - 240 for
10-15 minutes.
6. Quality inspection for coating layer.